Home       E-Mail       Imprint       

Mechanical Engineering

The field of mechanical engineering is uncovered best with the phytron motor series ZSS and ZSH. Up to 56 mm diameter size is for the ZSS series, and 57 mm to 107 mm are covered by our ZSH series.  

Housing   
  • Bench, rail, sub rack or wall mounting
Supply
  • Main- and intermediate supply module 24 to 70 VDC
Main Controller
  • Controls and administers up to 64 modules
  • Programm  and register memory up to 4 MB
  • Internal memory expandable with future memory modules
Host Interface
  • Selectable: RS 485, RS 232, RS 422, CAN, Ethernet, ProfiBus/ProfiNet
Modules
  • 4 Axes High End Indexer
  • Indexer Interface
  • Digital I/O
  • Analogue I/O 
  • Integrated Touch Panel
  • Customised
  • 2-phase stepper motors
  • Holding torques from 50 mNm to 7.2 Nm
  • Edge dimension from 20 to 86 mm
  • Number of steps (standard) 200
  • Step accuracy 5 % for 1.8° stepper motors
  • 2-phase, hybrid stepper motors
  • Holding torques from 0,45 Nm to 17 Nm (64-2410 oz-in)
  • Diameters: 56-107 mm 
  • NEMA compatible
  • Optional: gear, motor brake, encoder, 2nd shaft, coupling, etc.
  • 2-phase, hybrid step motors
  • Holding torques from 3.8 mNm to 700 mNm
  • Standard number of steps: 200
    Special step width depending on the motor sizes: 8, 24, 56, 72, 500
  • Diameters: 19 to 56 mm (0.75 to 2.2 in)
  • Optional: gear, motor brake, encoder, 2nd shaft, heat sink, coupling, etc.
  • Stepper motor controller with integrated power stage for SIMATIC ET 200S®
  • For 2 phase stepper motors
  • 5 APEAK at 24 to 48 VDC
  • Up to 1/512 microsteps
  • Online controller parameterization and diagnostics
  • STEP 7® programming
  • High-performance power stage, compatible with standard power stages on the market 
    (e. g. DSR 92-70)
  • Phase currents up to 9 APEAK / 70 V
  • Operation parameter setting: manual or online via ServiceBus
  • Different models available
  • Mains supply voltage 115 / 230 VDC
  • Internally fused mains input
  • Mains buffering 30 msec
  • Output voltage 48 VDC / 5 A or 24 VDC / 10 A
  • Permanently short circuit-proof output
  • Over voltage protection primary and secondary side
    • 15 to 30 mm in diameter
    • Bore for mounting the motor shaft: 3 to 12 mm
    • Maximum permissible torque: 0.71 to 4 Nm
    • Absolutely backlash-free
    • Stainless steel stepper motors for the toughest environmental conditions
    • Temperature range from -40 to +150 °C, rel. humidity up to 95%
    • Protection class IP 67, replacable radial sealing
    • Holding torques from 150 mNm to 5.5 Nm
    • Diameters 45 to 100 mm
    • Standard number of steps 200 (1,8°)
    • Special design on demand: suitable for food industry – radiation resistant
  • Small Servo Motors with Continuous Stall Torque from 0.03 to 0.9 Nm.
  • Control with a PC-based Motion Controller for Servo Motors and Stepper Motors

  • All fields of application at a glance
    Mechanical Engineering      Positioning and Handling      Food and Packaging      Research      Medical Engineering      Nuclear      Climatic      Cryo      Cleanroom      Aeronautical Engineering      Space Technology      Vacuum      Particle Accelerator      Arduino      Plant Automation      Paper and Print Industry     
    Phytron Inc. | Tel.: +1-802-872-1600 | Fax: +1-802-872-0311 | E-Mail: info@phytron.com