Home       E-Mail       Imprint       

Science and Research  

Reliability. Precision. High Step Resolutions.

Scientific experiments are often projects with indeterminable outcomes. All the more important are the accompanying dependable solutions from phytron. A few examples include adjusting optical elements in the measurement technology or a mirror in an accelerator, or in the transport of frozen samples in liquid nitrogen at below -200°C. The multifaceted combination of extreme demands poses a challenge, which phytron meets with individual solutions in small quantities the greatest accuracy, even in the field of optics and technical methods of analysis.
      • Stepper motors for extreme ambient conditions
      • Vacuum applications up to 10-11 hPa
      • Temperature range from –20 to +300 °C
      • Radiaton resistance 102 to 106 J/kg
      • Special models for clean room operation
      • Optional: gear, coupling, 2nd shaft, temperature sensor, etc.
Housing   
  • Bench, rail, sub rack or wall mounting
Supply
  • Main- and intermediate supply module 24 to 70 VDC
Main Controller
  • Controls and administers up to 64 modules
  • Programm  and register memory up to 4 MB
  • Internal memory expandable with future memory modules
Host Interface
  • Selectable: RS 485, RS 232, RS 422, CAN, Ethernet, ProfiBus/ProfiNet
Modules
  • 4 Axes High End Indexer
  • Indexer Interface
  • Digital I/O
  • Analogue I/O 
  • Integrated Touch Panel
  • Customised
Integrate our APS stepper motor power stage into your Arduino Aaplication: The Arduino APS Shield.
  • 2-phase, hybrid step motors
  • Holding torques from 3.8 mNm to 700 mNm
  • Standard number of steps: 200
    Special step width depending on the motor sizes: 8, 24, 56, 72, 500
  • Diameters: 19 to 56 mm (0.75 to 2.2 in)
  • Optional: gear, motor brake, encoder, 2nd shaft, heat sink, coupling, etc.
  • 2-phase, hybrid stepper motors
  • Holding torques from 0,45 Nm to 17 Nm (64-2410 oz-in)
  • Diameters: 56-107 mm 
  • NEMA compatible
  • Optional: gear, motor brake, encoder, 2nd shaft, coupling, etc.
  • Freely programmable 2-axes stepper motor controller
  • Phase currents up to 3.5 APEAK
  • Supply voltage 24 to 48 VDC
  • 8 digital inputs/8 digital outputs, 2 analog inputs, 2 encoder inputs,
    redundant motor enable input
  • USB, RS 485 or RS 232 interface
  • Programming in the well-tried MiniLog format

  • Freely programmable one axis stepper motor controller
  • Phase currents up to 3.5 APEAK
  • Supply voltage 24 to 48 VDC
  • 8 digital I/O, 1 analog input, 1 encoder input, redundant motor enable input
  • USB, RS 485 or RS 232 interface
  • Programming in the well-tried MiniLog format
  • Freely programmable 2-axes stepper motor controller with linear power stages
  • Best fit for extremely fine positioning and EMC-sensitive environments
  • Phase currents up to 1.7 APEAK 
  • Supply voltage 24 to 48 VDC
  • Step resolution up to 1/256 step
  • USB, RS 485 or RS 232 interface
  • Stepper motor controller with integrated power stage for SIMATIC ET 200S®
  • For 2 phase stepper motors
  • 5 APEAK at 24 to 48 VDC
  • Up to 1/512 microsteps
  • Online controller parameterization and diagnostics
  • STEP 7® programming
  • Suitable for low temperatures: He (-269 °C) or N2  (-196 °C)  
  • Ultra high vacuum applications up to 10-11 mbar
  • Radiation resistance up to 106 J/kg
  • Stainless steel housing
  • Customized design: Titanium housing - Space - Reduced magnetic emission
  • Stepper motors for operation in space
  • Applicable under high shock and vibration loads
  • Temperature range depends on the application
  • Radiation resistance up to 106 J/kg
  • Customized constructions: Integrated motor gear types - titanium housing etc.
    • Virtual instruments for Phytron stepper motor controllers of the MCC series
    • Graphical programming language for WINDOWS®
    • Demo VIs for commonly used applications

 

  • 15 to 30 mm in diameter
  • Bore for mounting the motor shaft: 3 to 12 mm
  • Maximum permissible torque: 0.71 to 4 Nm
  • Absolutely backlash-free
  • Stainless steel stepper motors for the toughest environmental conditions
  • Temperature range from -40 to +150 °C, rel. humidity up to 95%
  • Protection class IP 67, replacable radial sealing
  • Holding torques from 150 mNm to 5.5 Nm
  • Diameters 45 to 100 mm
  • Standard number of steps 200 (1,8°)
  • Special design on demand: suitable for food industry – radiation resistant
All fields of application at a glance
Mechanical Engineering      Positioning and Handling      Food and Packaging      Research      Medical Engineering      Nuclear      Climatic      Cryo      Cleanroom      Aeronautical Engineering      Space Technology      Vacuum      Particle Accelerator      Arduino      Plant Automation      Paper and Print Industry     
Phytron Inc. | Tel.: +1-802-872-1600 | Fax: +1-802-872-0311 | E-Mail: info@phytron.com