Home       E-Mail       Imprint       

Research

The wide field of research and development stipulates and causes new and different requests. All of our motor series can be used in this capacity, depending on needs and requirements.  

      • Stepper motors for extreme ambient conditions
      • Vacuum applications up to 10-11 hPa
      • Temperature range from –20 to +300 °C
      • Radiaton resistance 102 to 106 J/kg
      • Special models for clean room operation
      • Optional: gear, coupling, 2nd shaft, temperature sensor, etc.
Housing   
  • Bench, rail, sub rack or wall mounting
Supply
  • Main- and intermediate supply module 24 to 70 VDC
Main Controller
  • Controls and administers up to 64 modules
  • Programm  and register memory up to 4 MB
  • Internal memory expandable with future memory modules
Host Interface
  • Selectable: RS 485, RS 232, RS 422, CAN, Ethernet, ProfiBus/ProfiNet
Modules
  • 4 Axes High End Indexer
  • Indexer Interface
  • Digital I/O
  • Analogue I/O 
  • Integrated Touch Panel
  • Customised
  • 2-phase, hybrid stepper motors
  • Holding torques from 0,45 Nm to 17 Nm (64-2410 oz-in)
  • Diameters: 56-107 mm 
  • NEMA compatible
  • Optional: gear, motor brake, encoder, 2nd shaft, coupling, etc.
  • 2-phase, hybrid step motors
  • Holding torques from 3.8 mNm to 700 mNm
  • Standard number of steps: 200
    Special step width depending on the motor sizes: 8, 24, 56, 72, 500
  • Diameters: 19 to 56 mm (0.75 to 2.2 in)
  • Optional: gear, motor brake, encoder, 2nd shaft, heat sink, coupling, etc.
  • Freely programmable 2-axes stepper motor controller
  • Phase currents up to 3.5 APEAK
  • Supply voltage 24 to 48 VDC
  • 8 digital inputs/8 digital outputs, 2 analog inputs, 2 encoder inputs,
    redundant motor enable input
  • USB, RS 485 or RS 232 interface
  • Programming in the well-tried MiniLog format

  • Freely programmable one axis stepper motor controller
  • Phase currents up to 3.5 APEAK
  • Supply voltage 24 to 48 VDC
  • 8 digital I/O, 1 analog input, 1 encoder input, redundant motor enable input
  • USB, RS 485 or RS 232 interface
  • Programming in the well-tried MiniLog format
  • Freely programmable 2-axes stepper motor controller with linear power stages
  • Best fit for extremely fine positioning and EMC-sensitive environments
  • Phase currents up to 1.7 APEAK 
  • Supply voltage 24 to 48 VDC
  • Step resolution up to 1/256 step
  • USB, RS 485 or RS 232 interface
  • Stepper motor controller with integrated power stage for SIMATIC ET 200S®
  • For 2 phase stepper motors
  • 5 APEAK at 24 to 48 VDC
  • Up to 1/512 microsteps
  • Online controller parameterization and diagnostics
  • STEP 7® programming
  • Suitable for low temperatures: He (-269 °C) or N2  (-196 °C)  
  • Ultra high vacuum applications up to 10-11 mbar
  • Radiation resistance up to 106 J/kg
  • Stainless steel housing
  • Customized design: Titanium housing - Space - Reduced magnetic emission
  • Stepper motors for operation in space
  • Applicable under high shock and vibration loads
  • Temperature range depends on the application
  • Radiation resistance up to 106 J/kg
  • Customized constructions: Integrated motor gear types - titanium housing etc.
    • Virtual instruments for Phytron stepper motor controllers of the MCC series
    • Graphical programming language for WINDOWS®
    • Demo VIs for commonly used applications

 

  • 15 to 30 mm in diameter
  • Bore for mounting the motor shaft: 3 to 12 mm
  • Maximum permissible torque: 0.71 to 4 Nm
  • Absolutely backlash-free
  • Small Servo Motors with Continuous Stall Torque from 0.03 to 0.9 Nm.
  • Control with a PC-based Motion Controller for Servo Motors and Stepper Motors

  • All fields of application at a glance
    Mechanical Engineering      Positioning and Handling      Food and Packaging      Research      Medical Engineering      Nuclear      Climatic      Cryo      Cleanroom      Aeronautical Engineering      Space Technology      Vacuum      Particle Accelerator      Arduino      Plant Automation      Paper and Print Industry     
    Phytron Inc. | Tel.: +1-802-872-1600 | Fax: +1-802-872-0311 | E-Mail: info@phytron.com